| HP ProCurve Switch 2610-48
(J9088A) | HP ProCurve Switch 2610-24
(J9085A) | HP ProCurve Switch 2610-24-PWR
(J9087A) |
|---|
| Ports |
| 48 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
Media Type: Auto-MDIX
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
| 24 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
Media Type: Auto-MDIX
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
| 24 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
Media Type: Auto-MDIX
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
|
| Physical characteristics |
| Dimensions | 9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39 cm) (1U height) | 9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39 cm) (1U height) | 12.5(d) x 17.4(w) x 1.73(h) in. (31.75 x 44.2 x 4.39 cm) (1U height) |
| Weight | 10.75 lb. (4.88 kg), Fully loaded | 5.5 lb. (2.49 kg), Fully loaded | 15.05 lb. (6.83 kg), Fully loaded |
| Memory and processor |
| Processor | MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 2 MB | MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 1 MB | MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 1 MB |
| Mounting |
| Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
| Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
| Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
|
| Performance |
| 100 Mb Latency | < 6.2 µs (LIFO) | < 4.1 µs (LIFO) | < 4.1 µs (LIFO) |
| 1000 Mb Latency | < 4.4 µs (LIFO) | < 2.9 µs (LIFO) | < 2.9 µs (LIFO) |
| Throughput | up to 13.0 million pps | up to 9.5 million pps | up to 9.5 million pps |
| Routing/Switching capacity | 17.6 Gbps | 12.8 Gbps | 12.8 Gbps |
| MAC address table size | 8,000 entries | 8,000 entries | 8,000 entries |
| Environment |
| Operating temperature | 32ºF to 122ºF (0ºC to 50ºC) | 32ºF to 122ºF (0ºC to 50ºC) | 32ºF to 122ºF (0ºC to 50ºC) |
| Operating relative humidity | 15% to 95% @ 104ºF (40ºC), non-condensing | 15% to 95% @ 104ºF (40ºC), non-condensing | 15% to 95% @ 104ºF (40ºC), non-condensing |
| Non-operating/Storage temperature | -40ºF to 158ºF (-40ºC to 70ºC) | -40ºF to 158ºF (-40ºC to 70ºC) | -40ºF to 158ºF (-40ºC to 70ºC) |
| Non-operating/Storage relative humidity | 15% to 90% @ 149ºF (65ºC), non-condensing | 15% to 90% @ 149ºF (65ºC), non-condensing | 15% to 90% @ 149ºF (65ºC), non-condensing |
| Altitude | up to 10,000 ft. (3 km) | up to 10,000 ft. (3 km) | up to 10,000 ft. (3 km) |
| Acoustic | Power: 45 dB, Pressure: 36.2 dB; DIN 45635T.19 per ISO 7779 | Power: 0 dB, Pressure: 0 dB No Fan | Power: 64 dB, Pressure: 57 dB; DIN 45635T.19 per ISO 7779 |
| Electrical characteristics |
| | Achieved Miercom Certified Green Award | | |
| Maximum heat dissipation | 285 BTU/hr (300.67 kJ/hr) | 142 BTU/hr (149.81 kJ/hr) | 410 BTU/hr (432.55 kJ/hr), (switch-only BTU/hr: 410; combined switch + max. PoE devices at 15.4 W: 2281 BTU/hr ) |
| Voltage | 100-127 / 200-240 VAC | 100-127 / 200-240 VAC | 100-127 / 200-240 VAC |
| Current | 1.3 / 0.8 A | 0.8 / 0.4 A | 7.0 / 3.5 A |
| Maximum power rating | 66 W | 41 W | 77 W |
| Frequency | 50 / 60 Hz | 50 / 60 Hz | 50 / 60 Hz |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Power consumption: 77 W without PoE; 527 W with PoE. |
| Safety |
| CSA 22.2 No. 60950
UL 60950
IEC 60950
EN 60950
| CSA 22.2 No. 60950
UL 60950
IEC 60950
EN 60950
| CSA 22.2 No. 60950
UL 60950
IEC 60950
EN 60950
|
The HP ProCurve Switch 2610 Series consists of five switches—the HP ProCurve Switch 2610-24 and 2610-48 provide 24 and 48 ports of 10/100 connectivity. The HP ProCurve Switch 2610-24 is fanless, providing quiet operation and making it ideal for deployment in open spaces. The HP ProCurve 2610- 24/12PWR, 2610-24-PWR, and 2610-48-PWR are IEEE 802.3af-compliant for Power over Ethernet (PoE) and provide up to 15.4 W for 12, 24, and 48 ports. The 2610-24/12PWR has 24 10/100 ports and provides 12 ports of PoE. All switches include two 10/100/1000Base-T ports and two mini-GBIC slots for Gigabit uplink connectivity. An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure. With static routing, robust security and management features, free lifetime warranty, and free software updates, the 2610 series is a cost-effective solution for customers who are building converged enterprise edge networks.
