HP ProCurve 10-GbE SFP+ SR Transceiver (J9150A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 m on multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR)
Duplex: full only

Connectivity

Connector type: LC
Wavelength: 850 nm

Physical characteristics

Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP+

Environment

Operating temperature: 32ºF to 158ºF (0ºC to 70ºC)
Operating relative humidity: 0% to 85%, non-condensing
Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.6 W
Power consumption maximum: 0.8 W

Cabling

Cable type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively

Maximum distance:

2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km

Cable length: 2-300m
Fiber type: Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.