HP ProCurve 10-GbE X2-SC LR Optic (J8437A)

An X2 form-factor transceiver that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on single-mode fiber.

Ports

1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR)
Duplex: full only

Connectivity

Connector type: SC
Wavelength: 1310 nm

Physical characteristics

Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm)
Weight: 0.35 lb. (0.16 kg)
Transceiver form factor: X2

Environment

Operating temperature: 32ºF to 104ºF (0ºC to 40ºC)
Operating relative humidity: 15% to 95%, non-condensing
Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 2 W
Power consumption maximum: 3 W

Cabling

Cable type:

Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1

Maximum distance:

10 km

Cable length: 2m to 10km with 9/125 µm single-mode cable
Fiber type: Single Mode

Notes

Conditioning patch cord cables are not supported

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.