HP ProCurve Gigabit 1000Base-T Mini-GBIC

United States-English

» Contact HP

		ProCurve Networking by HP > Products & Solutions > Product	» My ProCurve Sign In
		HP ProCurve Gigabit 1000Base-T Mini-GBIC accessories


	»	HP ProCurve Networking
Small Business Networks Why ProCurve? Products Solutions Enterprise SMB Customer Care Services Support Design center Network training Partners Partner Program Find a Partner Alliance Program Newsroom How to Buy Contact ProCurve

HP ProCurve Gigabit 1000Base-T Mini-GBIC (J8177C)
A small form-factor pluggable (SFP) Gigabit copper transceiver that provides a full-duplex Gigabit solution up to 100 m on Category 5 or better cable.

Ports
1 RJ-45 1000Base-T port (IEEE 802.3ab Type 1000Base-T)
Duplex: full only

Physical characteristics
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)

Environment
Operating temperature: 32ºF to 158ºF (0ºC to 70ºC); with 100 LFM airflow over the SFP module
Operating relative humidity: 0% to 95% @ 75ºF (25ºC), non-condensing
Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC)
Non-operating/Storage relative humidity: 0% to 95% @ 77ºF (25ºC), non-condensing
Altitude: up to 10,000 ft. (3000 km)

Cabling

Cable type:
1000Base-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000Base-T
Maximum distance:

100 m

Notes
Power consumption is nominally 1 watt.

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J8177C 1000Base-T Mini-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

The J8177C Gigabit copper mini-GBIC is not supported on dual-personality ports.

The J8177C is capable of 100 Mb operation. This is supported on only the HP ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation.

Important: The earlier J8177B does not support 100 Mb operation.

When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC port, but will block access to the other port.